• Hydrogen bicycle (Fuel Cell Bikes)

    Hydrogen bicycle (Fuel Cell Bikes)

    fuel cell bikes offer significant advantages over electric battery bikes in terms of both range and refuelling. Whereas batteries typically take several hours to recharge, hydrogen cylinders can be refilled in under 2 minutes.

  • Hydrogen Fuel Cell (Electrochemical cell)

    Hydrogen Fuel Cell (Electrochemical cell)

    A fuel cell is an electrochemical cell that converts the chemical energy of a fuel (often hydrogen) and an oxidizing agent (often oxygen) into electricity through a pair of redox reactions. Fuel cells are different from most batteries in requiring a continuous source of fuel and oxygen (usually from air) to sustain the chemical reaction, whereas in a battery the chemical energy usually comes from metals and their ions or oxides that are commonly already present in the battery, except in flow batteries. Fuel cells can produce electricity continuously for as long as fuel and oxygen are supplied.

  • Carbon fiber UAV Rack-Hydrogen Energy

    Carbon fiber UAV Rack-Hydrogen Energy

    Product introduction (1) 280 wheelbase, the boom adopts 3.0mm thick carbon fiber board, and the fuselage thickness is 1.5mm carbon fiber board, which ensures the strength of the aircraft in flight and effectively reduces vibration; (2) The whole unmanned frame is made of pure carbon fiber board, which is light in weight, and the whole empty machine weighs 135g (including the spare parts of UAV such as bolt aluminum column), which is small in volume and long in service life (3) The fusela...
  • Carbon Fiber Cylinder-Hydrogen Energy

    Carbon Fiber Cylinder-Hydrogen Energy

    The carbon fiber wound composite cylinders have better performance than metal cylinders (steel cylinders, aluminum seamless cylinders) which are made of a single material such as aluminum and steel. It increased gas storage capacity but are 50% lighter than metal cylinders of the same volume, offers good corrosion resistance and not pollute the medium. Carbon fiber composite material layer is composed of carbon fiber and matrix. The carbon fiber impregnated with resin glue solution is wound to the lining in a specific way, and then the carbon fiber composite pressure vessel is obtained after high temperature curing and other processes.

  • Automobile carbon fiber battery box

    Automobile carbon fiber battery box

    We use the battery box made of fiber composite materials to help you improve your travel efficiency tomorrow. Compared with traditional materials, their weight is greatly reduced, longer range can be achieved, and other important requirements in safety, economy and thermal management can be met. We also support the new modern electric vehicle platform