OEM Factory for Rayon Carbon Fiber - Carbon fiber felt Carbon fiber fire blanket – WANHOO
OEM Factory for Rayon Carbon Fiber - Carbon fiber felt Carbon fiber fire blanket – WANHOO Detail:
Chopped carbon fiber
The carbon fiber chopped strand are based on the polyacrylonitrile fiber as the raw material. Via carbonization, special surface treatment, mechanical grinding, sieving and drying.
It is stable, electrical conductive, self-lubricating and reinforcing. Because of that It can composite with resin ,plastic, metal, rubber and so on. So It can reinforce the strength and wear resistance of the materials.
It can also be commonly compounded with general engineering thermoplastics (e.g., PC, Nylon, etc.) and high-temperature thermoplastic resins (e.g, PEEK, PEI, etc.), the resulting composite offers industry-leading high strength-to-weight and stiffness-to-weight ratios.
Now It is used in many fields. For examples: Electronic chips, conducting plate, conducting floor, Electronic machinery, anti-static industries, anti-static filter, defense industry, building insulation, chemical.
CFRP are composite materials. In this case the composite consists of two parts: a matrix and a reinforcement. In CFRP the reinforcement is carbon fiber, which provides its strength. The matrix is usually a polymer resin, such as epoxy, to bind the reinforcements together. Because CFRP consists of two distinct elements, the material properties depend on these two elements.
Reinforcement gives CFRP its strength and rigidity, measured by stress and elastic modulus respectively. Unlike isotropic materials like steel and aluminum, CFRP has directional strength properties. The properties of CFRP depend on the layouts of the carbon fiber and the proportion of the carbon fibers relative to the polymer. The two different equations governing the net elastic modulus of composite materials using the properties of the carbon fibers and the polymer matrix can also be applied to carbon fiber reinforced plastics
below is the our products in the application of carbon fiber reinforced plastics
Thermoplastic carbon fiber particles with PI/ PEEK
Advantage：High strength, high modulus, electrical conductivity
Usage: EMI shielding, Antistatic, reinforcement the engineering plastic
| Material | Carbon fiber & PI/PEEK |
| Carbon fiber Content (%) | 97% |
| PI/PEEK content(%) | 2.5-3 |
| Water Content(%) | <0.3 |
| Length | 6mm |
| Thermal stability of surface treatment | 350℃ - 450 ℃ |
| Recommended use | Nylon6/66, PPO, PPS, PEI, PES, PPA, PEEK, PA10T, PEKK, PPS，PC, PI, PEEK |
Product detail pictures:
Related Product Guide:
We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for OEM Factory for Rayon Carbon Fiber - Carbon fiber felt Carbon fiber fire blanket – WANHOO , The product will supply to all over the world, such as: Greece, Afghanistan, Somalia, As a way to use the resource on the expanding info in international trade, we welcome prospects from everywhere on the web and offline. In spite on the high quality objects we offer you, effective and satisfying consultation service is supplied by our qualified after-sale service group. Item lists and in depth parameters and any other info weil be sent to you timely for the inquiries. So you should make contact with us by sending us emails or call us when you've got any questions about our organization. ou could also get our address information from our site and come to our enterprise. We get a field survey of our merchandise. We're confident that we are going to share mutual accomplishment and create solid co-operation relations with our companions within this market place. We're seeking forward for your inquiries.
By Deborah from Poland - 2018.11.28 16:25
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Marjorie from Jakarta - 2018.02.12 14:52
